188bet网址

The following are answers to some of the questions most frequently asked by Land Pride customers.

Compact Drills
Why will my drill not plant?
回答

The seed box is most likely not level. Level the drill in planting position.

Why are my coulters not going in the ground?
回答

在种植位置进行水平钻。

Add weight Bracket option & add customer supplied weights.

调整框架高度所以coulter½deepe“1”r than desired seeding depth.

What is the maximum transport speed?
我的紧凑型钻头的种子率设置是什么?
回答

Refer to the Operator’s Manual (manual can be found on Related Pages link below) for seed charts and for step by set calibration.

有关的影片
我想订购什么库?
回答

所选择的Coulter由土壤条件确定,以及您想要在开启前面的土壤中扰乱土壤。5/16“凹槽刀片为牧场改造提供了低土障碍。5/8“涡轮刀片提供最大的渗透和性能。

How large of a tractor do I need?
回答

All compact drills need to stay in the HP range stated in the Operator's Manual (manual can be found on Related Products Page below). Lift capacity of the 3-point is critical on all 3-point drills.

How do I adjust Seed Depth?
回答

使用上面的T手柄调整种子深度。前进是更深的,后方是较浅的种子深度。

我需要加重吗?
回答

The drill can be ordered with the weight bracket, and then weight can be added as needed. Weight needed is typically 100# per foot.

Can I add seed boxes to my drill later on?
回答

是的,可以在以后添加种子盒。请注意,订购单位单独订购种子箱时可能会有更长的时间,并且套件中将有一些没有使用的部分。

Dirtworking

HD Post Hole Diggers

Why won’t my auger go down into the ground?
回答

有许多变量,但最常见的是地面很难,需要额外的重量。可选的下压力套件将有助于这种情况。

Why does my HD turn slower than my PTO driven unit?
回答

HD单元具有不同的齿轮比,但它具有比PD模型更多的扭矩。HD的RPM由GPM和压力决定。

多少磅。击力是可选的下压力套件添加到单位吗?
回答

安装套件时,添加了大约500磅的向下力。

Can I use a grade 8 bolt to replace the shear pin?
回答

No. Damage to the unit will occur if a higher grade bolt is used in place of the original.

我可以更换牙齿吗?
回答

Yes, all teeth supplied by Land Pride are replaceable.

树桩磨床

How does the Stump Grinder work?
有关的影片

木屑

General Operation, Adjustments & Safety Video
有关的影片

Core Aerators

为什么勺子不会进入地面?
回答

这可能是多件事。一个地面可能太难,您可能需要向设备增加重量。你的勺子可以插入,不要妥善清洁。三个地面可能没有足够的水分。

CA25的水箱尺寸是多少?
回答

对于CA2560,可以添加490磅。随着水箱和CA2572可以加入600磅。

My spoons are bending, what is causing that?
回答

不要在地面上与核心曝气器转动。这对勺子施加了太多的压力,他们会弯曲。

Can I get water tanks for this unit?
回答

No, the water tanks are only for the CA25 series unit.

Grapples

Will this SGC06 or SGC10 grapple hook up to a John Deere tractor?
回答

是的,我们将其放在一个空白后面,您将不得不添加自己的安装座。

这个sgc05抓钩到John Deere Tractor吗?
回答

No this grapple is designed to go on Kubota BX and B units.

Do I have to have a 3rd function valve on my tractor for this unit to work?
回答

No you can run off the rear remotes of the tractor too. The 3rd function valve makes it easier for a person to run the grapple and still have rear remotes available too.

Disc Harrows

我的光盘耙可提供哪些配件以优化其功能?
回答
  • Electronic Spin Spreader – DH10, DH15 and DH25
    • Designed to plant or spread seed, fertilizer, lime, and other soil benefiting materials. Can also be used to spread sand and salt in ice and snow conditions.
  • 拖哈罗 - DH10,DH15和DH25(可选的播种套餐)
    • Used to smooth out freshly cultivated soil and work material into the soil quicker.
  • Seed Bed Roller – DH10, DH15 and DH25 (optional seeding package)
    • Used to break up large clumps of soil and dirt clods. Aids in seed to soil contact for better germination rates.
Is it possible to add sweeps to the Disc Harrow?
回答

An optional center sweep kit is available for the DH15, DH25 and DH35 series disc harrows.

  • 9” Center Sweep Kit
  • Designed to remove center ridge.

分级刮板

应该更换一次滑雪鞋的频率?
回答

The skid shoes should be replaced once the thickness that 1/8” at any point. For longer wear life the skid shoe can be turned around if one end is wearing faster than the other.

How do I replace worn shank tips on my Grading Scraper?
回答

可以通过加热尖端两侧的凹陷区域并使用钝头施加关闭它们来除去柄尖端。一旦安装一旦安装牢固地将其固定到位,需要使用新的提示。

Can I use my Grading Scraper when I am traveling both forward and reverse?
回答

是的,土地188bet官网骄傲提供后挂式切割刀片套件,允许用户在向前行驶时移动材料,同时备份。

盒子刮板

HRL3578和HR3584之间有什么区别
回答
  • HRL3578称为低回收。它有一个19英寸的Lowback框架,带有17英寸的刮刀。
  • The HR3584 is referred to as the highback. It has a 24” highback frame with a 23” moldboard.
切割刀片是可更换的吗?
回答

切割刀片不仅是可更换的,但它是可逆的。可以逆转热处理的刀片以获得最佳使用。

How do I raise and lower my shanks?
回答
  • MR1572设置有机械杆以升高和降低柄部。(在调整柄之前,始终确保刮刀在地面上。)
    • To lower the shanks, pull lever towards unit to release lock pin and move lever away from unit until shank locks into desired position. To raise the shanks, pull lever towards the unit to release lock pin and move lever toward unit until shank locks into desired position.
  • HR2572,HR3584和HRL3572设置为液压升高和降低柄部。(在调整柄之前,始终确保刮刀在地面上。)
    • To lower shanks retract hydraulic cylinder, and to raise shanks extend hydraulic cylinder.
Can my retractable box scraper be used to backfill?
回答
  • MR15 and HR25 come equipped with a rear backfill blade. Simply lower the box scraper and back the rear facing grader blade into the material you are trying to backfill.
  • HRL3578和HR3584配备了后铰链栅极,可锁定或解锁以帮助回填。在回填操作期间必须提高柄部。简单地背面将后方的平地机刀片进入您试图回填的材料,并继续完成任务。

Can I adjust the depth of my shanks on my fixed bar box scraper?
回答

You can manually raise and lower the shanks on each unit.

  • BB05 and BB12 has notches in each shank for 3 separate depth adjustments. A spring retainer clip inserted behind the shank hold it is place.
  • BB15和BB25在每个柄部中有4个孔,以进行深度调整。柄部用L形柄销和销钳销固定。

拖动刮刀

我需要将权重添加到我的BB45拖动刮刀?
回答

可选的重量箱组件可以填充混凝土,以增加土壤渗透。

Post Hole Diggers

What should I do if my auger is turning the wrong direction?
回答

Hydraulic hoses are reversed. Switch the hydraulic hoses at the outlet.

What should I do if my auger digs half way down and stops, will not go any deeper?
回答

You could be coming across a hard soil layer that is causing more resistance on the auger assembly. Land Pride offers an option down pressure to aid in forcing the auger into the ground.

What if I want to dig deeper than my 48” auger will allow?
回答

188bet官网土地骄傲offers two auger extensions for increased hole depth.

  • 7” Auger Extension
  • 14” Auger Extension
当我的剪切螺栓突破时,可能会导致我的传动系列放弃?
回答

Drivelines come equipped with a retainer set screw to keep the driveline attached when the shear bolt has sheared. Verify that your unit has the correct grade shear bolt installed to prevent gearbox damage and make sure the retainer screw and nut are installed.

What auger sizes are available for my unit?
回答
  • PD10和PD15可在6“,9”和12“中可用 - 无需螺旋钻扩展选项
  • PD25 and PD35 available in 6”, 9”, 12”, 15” 18” and 24” tree auger assembly – Auger extensions available in 7” and 14”
我的螺旋钻减少了转速,是什么可能导致它?
回答

Hydraulic oil flow could be restricted. Check flow meter, remove any dirt particles in fittings and replace couplers. Replace oil filter.

Can I use a hex head auger on my unit?
回答

No, auger attachment is set up for a 2-1/2” round auger pipe. No adapter is available through Land Pride.

Landscape Rakes

Is there a flip down blade option?
回答

不 - 我们在05系列上没有提供翻转刀片。

耙前或后面的翻转刀片吗?
回答

刀片在耙子面前。

我可以只取代一颗牙齿?
回答

Yes, If one tooth becomes damaged you can easily remove one tooth and replace it.

Rear Blades

Why are the blade angle & tilt very hard to move?
回答

King Pins具有紧张的公差。在地面上的刀片,拆下垫圈/板,并使用穿透油来润滑金萘。重新组装零件并旋转枢轴。

Can you spin the blade around with the tilt cylinder on it?
回答

Yes. The Tilt lug is below the turn table.

搭车

使用QH时,CLEVIS不会留在RCR或FDR单元上。怎么了?
回答

Add option: Floating top link assembly.

What do I do if my 3 point will not go low enough?
回答

Your 3 point lower arms are in the top position. Adjust lower arms to lower hole on tractor.

The fit on the lower lugs is too loose. How do I fix this?
回答

We offer many different spacers depending on what unit you are hooking to QH.

页面